See it at DEWALT: DW734
DEWALT's own page for the DW734. Not a paid link.
DW734 vs 6550T
DEWALT DW734 vs WEN Products 6550T. Of the 4 figures both makers publish, none differs outright. One is worded too differently to set side by side: knives or inserts. Both are planers with a similar cutting width: cutting width 12-1/2-in. (318mm) on the DW734, 12.5 inches on the 6550T, in their makers' figures.
The makers' figures side by side
| Specification | DEWALT DW734 | WEN Products 6550T |
|---|---|---|
| Current (amps) | 15 | 15A |
| Voltage | 120V | — |
| Depth of cut | — | 0 to 3/32 of an inch |
| Cutting width | 12-1/2-in. (318mm) | 12.5 inches |
| Maximum stock thickness | 6 inches | 6 inches |
| Feed rate | — | 26 feet per minute |
| Knives or inserts | Three-knife | two high carbon steel double-edged blades (SK5) |
| Speed | 10,000 RPM | — |
| Included | (1) 12-1/2-Inch (318mm) Corded Electric Thickness Planer with Three Knife Cutter-Head; (1) Dust Hood | — |
| Weight | 80 lbs | — |
| Warranty | 3 Year Limited Warranty | — |
Each figure is the maker's own, as cited row by row on the DW734 and 6550T pages and listed in the sources below. 7 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
DEWALT DW734
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
WEN Products 6550T
See it at WEN Products: 6550T
WEN Products' own page for the 6550T. Not a paid link.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Knives or inserts: DW734: Three-knife. 6550T: two high carbon steel double-edged blades (SK5).
Figures cited for one of the two: only DEWALT's cited pages give voltage, speed, included, weight and warranty; only WEN Products' cited pages give depth of cut and feed rate. Ask the other maker before treating the DW734 and 6550T as equal on those points.
The DW734 and the 6550T in full
DEWALT DW734
DEWALT · planer · cutting width 12-1/2-in. (318mm) · maximum stock thickness 6 inches · current (amps) 15
WEN Products 6550T
WEN Products · planer · cutting width 12.5 inches · maximum stock thickness 6 inches · current (amps) 15A
Every tool we list from DEWALT and WEN Products.