See it at DELTA Machinery: 36-L536
DELTA Machinery's own page for the 36-L536. Not a paid link.
36-L536 vs JPS-10-30C
DELTA Machinery 36-L536 vs JET JPS-10-30C. Of the 12 figures both makers publish, 4 differ: horsepower, voltage, table height and speed. 5 are worded too differently to set side by side: motor, phase, rip capacity and table size and 1 more. Both are table saws with the same blade diameter, 10 in. in both makers' figures.
The makers' figures side by side
| Specification | DELTA Machinery 36-L536 | JET JPS-10-30C |
|---|---|---|
| Motor | Specs; Horsepower: 5 HP; Voltage: 230V; Phase: 1-Phase | Totally enclosed, fan cooled, induction |
| Horsepower | 5 HP | 1.75 HP |
| Current (amps) | — | 14.8 A |
| Voltage | 230V | 120 V |
| Phase | 1-Phase | 1 PH |
| Blade diameter | 10 in. | 10 in. |
| Arbor | 5/8 in. | 5/8 in. (15.88 mm) |
| Rip capacity | Max. Rip To Right Of Blade: 52 in.; Max. Rip To Left Of Blade: 13-1/2 in. | 30 in. |
| Depth of cut | 3-1/8 in. | 3-1/8 in. (79 mm) |
| Bevel capacity | — | 45° left tilt |
| Table size | 31 in. x 40 in. | 20 x 27 in. (508 x 686 mm) |
| Table height | 35 in. | 34-3/4 in. (883 mm) |
| Speed | 4300 RPM | 4000 RPM |
| Noise level | — | 80 dB at 30 in. (762mm) from blade |
| Dust port | 4 in. and 5 in. | 4 in. (102 mm) |
| Included | — | 10 in. (254 mm), 40 tooth |
| Dimensions | — | 60 x 40 x 43 in. (1524 x 1016 x 1090 mm) |
| Weight | 624 lbs. | — |
Every cell is the maker's own wording, cited on the 36-L536 and JPS-10-30C pages; the sources are listed at the end. Where a cell has a dash, 6 of them in this table, the maker pages we cite do not give the figure.
Where to buy
DELTA Machinery 36-L536
JET JPS-10-30C
See it at JET: JPS-10-30C
JET's own page for the JPS-10-30C. Not a paid link.
Where the 36-L536 and JPS-10-30C figures differ
- Horsepower: 36-L536: 5 HP. JPS-10-30C: 1.75 HP.
- Voltage: 36-L536: 230V. JPS-10-30C: 120 V.
- Table height: 36-L536: 35 in. JPS-10-30C: 34-3/4 in. (883 mm).
- Speed: 36-L536: 4300 RPM. JPS-10-30C: 4000 RPM.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: 36-L536: Specs; Horsepower: 5 HP; Voltage: 230V; Phase: 1-Phase. JPS-10-30C: Totally enclosed, fan cooled, induction.
- Phase: 36-L536: 1-Phase. JPS-10-30C: 1 PH.
- Rip capacity: 36-L536: Max. Rip To Right Of Blade: 52 in.; Max. Rip To Left Of Blade: 13-1/2 in. JPS-10-30C: 30 in.
- Table size: 36-L536: 31 in. x 40 in. JPS-10-30C: 20 x 27 in. (508 x 686 mm).
- Dust port: 36-L536: 4 in. and 5 in. JPS-10-30C: 4 in. (102 mm).
Cited for one of the pair: only DELTA Machinery's cited pages give weight; only JET's cited pages give current, bevel capacity, noise level, included and dimensions. The other maker may publish the figure elsewhere; ask it rather than assume the 36-L536 and JPS-10-30C match there.
The 36-L536 and the JPS-10-30C in full
DELTA Machinery 36-L536
DELTA Machinery · table saw · blade diameter 10 in. · horsepower 5 HP
JET JPS-10-30C
JET · table saw · blade diameter 10 in. · horsepower 1.75 HP · rip capacity 30 in.
Every tool we list from DELTA Machinery and JET.