See it at DELTA Machinery: 36-L536
DELTA Machinery's own page for the 36-L536. Not a paid link.
36-L536 vs ALPHA HW110LC-36Pro
DELTA Machinery 36-L536 vs Harvey Woodworking ALPHA HW110LC-36Pro. Of the 5 figures both makers publish, 1 differs: horsepower. 3 are worded too differently to set side by side: voltage, phase and dust port. Both are table saws, with the same blade diameter in their makers' figures.
The makers' figures side by side
| Specification | DELTA Machinery 36-L536 | Harvey Woodworking ALPHA HW110LC-36Pro |
|---|---|---|
| Motor | Specs; Horsepower: 5 HP; Voltage: 230V; Phase: 1-Phase | — |
| Horsepower | 5 HP | 2HP (1.65kW) |
| Current (amps) | — | 16A/8A (115V/230V North America), 10A (Europe/Asia) |
| Voltage | 230V | 115V/230V (North America), 220V (Europe/Asia) |
| Phase | 1-Phase | 1Ph |
| Blade diameter | 10 in. | — |
| Arbor | 5/8 in. | Arbor Diameter: 5/8" (15.875mm) North America |
| Rip capacity | Max. Rip To Right Of Blade: 52 in.; Max. Rip To Left Of Blade: 13-1/2 in. | — |
| Depth of cut | 3-1/8 in. | — |
| Table size | 31 in. x 40 in. | — |
| Table height | 35 in. | — |
| Speed | 4300 RPM | — |
| Dust port | 4 in. and 5 in. | Dust Ports: Upper and Lower (4" diameter); Required Air Flow: 470 CFM (800 m³/h) minimum |
| Included | — | Included Blade: 10" DESTROYER 40T General Purpose |
| Weight | 624 lbs. | — |
| Safety listing | — | UL62841 (North America), CE (Europe/Asia), TÜV Rheinland |
Every cell is the maker's own wording, cited on the 36-L536 and ALPHA HW110LC-36Pro pages; the sources are listed at the end. A dash (11 here) means the figure is not on the maker pages we cite.
Where to buy
DELTA Machinery 36-L536
Harvey Woodworking ALPHA HW110LC-36Pro
See it at Harvey Woodworking: ALPHA HW110LC-36Pro
Harvey Woodworking's own page for the ALPHA HW110LC-36Pro. Not a paid link.
Where the 36-L536 and ALPHA HW110LC-36Pro figures differ
- Horsepower: 36-L536: 5 HP. ALPHA HW110LC-36Pro: 2HP (1.65kW).
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Voltage: 36-L536: 230V. ALPHA HW110LC-36Pro: 115V/230V (North America), 220V (Europe/Asia).
- Phase: 36-L536: 1-Phase. ALPHA HW110LC-36Pro: 1Ph.
- Dust port: 36-L536: 4 in. and 5 in. ALPHA HW110LC-36Pro: Dust Ports: Upper and Lower (4" diameter); Required Air Flow: 470 CFM (800 m³/h) minimum.
Where the table has one figure and a dash, only DELTA Machinery's cited pages give motor, blade diameter, rip capacity, depth of cut, table size, table height, speed and weight; only Harvey Woodworking's cited pages give current, included and safety listing. Those rows are open questions for the other maker, not ties between the 36-L536 and ALPHA HW110LC-36Pro.
The 36-L536 and the ALPHA HW110LC-36Pro in full
DELTA Machinery 36-L536
DELTA Machinery · table saw · blade diameter 10 in. · horsepower 5 HP
Harvey Woodworking ALPHA HW110LC-36Pro
Harvey Woodworking · table saw · horsepower 2HP (1.65kW)
Every tool we list from DELTA Machinery and Harvey Woodworking.