See it at DELTA Machinery: 36-L336
DELTA Machinery's own page for the 36-L336. Not a paid link.
36-L336 vs PM2000T (PM25130KT)
DELTA Machinery 36-L336 vs Powermatic PM2000T (PM25130KT). Of the 6 figures both makers publish, 1 differs: horsepower. 2 are worded too differently to set side by side: phase and dust port. Both are table saws, compared on the 6 figures published for both.
The makers' figures side by side
| Specification | DELTA Machinery 36-L336 | Powermatic PM2000T (PM25130KT) |
|---|---|---|
| Motor | Specs; Horsepower: 3 HP; Voltage: 230V; Phase: 1-Phase | — |
| Horsepower | 3 HP | 5 |
| Voltage | 230V | 230 V |
| Phase | 1-Phase | 230V Single Phase |
| Blade diameter | 10 in. | 10 in. |
| Arbor | 5/8 in. | — |
| Rip capacity | Max. Rip To Right Of Blade: 36 in.; Max. Rip To Left Of Blade: 13-1/2 in. | — |
| Depth of cut | Depth of Cut at 90°: 3-1/8 in.; Depth of Cut at 45°: 2-1/8 in. | — |
| Table size | 31 in. x 40 in. | — |
| Table height | 35 in. | — |
| Speed | 4300 RPM | — |
| Dust port | 4 in. and 5 in. | 4 in. |
| Dimensions | Length: 66-1/2 in.; Width: 37 in.; Height: 35 in. | — |
| Weight | 624 lbs. | — |
| Warranty | 5 Year Warranty | 5 Year |
The 36-L336 and PM2000T (PM25130KT) pages cite each of these figures row by row, and the sources below list where they were read. 9 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
DELTA Machinery 36-L336
Powermatic PM2000T (PM25130KT)
See it at Powermatic: PM2000T (PM25130KT)
Powermatic's own page for the PM2000T (PM25130KT). Not a paid link.
Where the 36-L336 and PM2000T (PM25130KT) figures differ
- Horsepower: 36-L336: 3 HP. PM2000T (PM25130KT): 5.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Phase: 36-L336: 1-Phase. PM2000T (PM25130KT): 230V Single Phase.
- Dust port: 36-L336: 4 in. and 5 in. PM2000T (PM25130KT): 4 in.
Figures cited for one of the two: only DELTA Machinery's cited pages give motor, arbor, rip capacity, depth of cut, table size, table height, speed, dimensions and weight. Ask the other maker before treating the 36-L336 and PM2000T (PM25130KT) as equal on those points.
The 36-L336 and the PM2000T (PM25130KT) in full
DELTA Machinery 36-L336
DELTA Machinery · table saw · blade diameter 10 in. · horsepower 3 HP
Powermatic PM2000T (PM25130KT)
Powermatic · table saw · blade diameter 10 in. · horsepower 5
Every tool we list from DELTA Machinery and Powermatic.
Sources
- 36-L336 | 3-HP Motor 10 in. UNISAW® with 36 in. BIESEMEYER® Fence System - Delta Machinery — DELTA Machinery
- DELTA Machinery 36-L336 product page — DELTA Machinery
- ArmorGlide 10in Table Saw 30in Rip 5HP 230V 1Ph | Powermatic — Powermatic