See it at DELTA Machinery: 36-L336
DELTA Machinery's own page for the 36-L336. Not a paid link.
36-L336 vs JPS-10-30C
DELTA Machinery 36-L336 vs JET JPS-10-30C. Of the 13 figures both makers publish, 4 differ: horsepower, voltage, table height and speed. 7 are worded too differently to set side by side: motor, phase, rip capacity and depth of cut and 3 more. Both are table saws with the same blade diameter, 10 in. in both makers' figures.
The makers' figures side by side
| Specification | DELTA Machinery 36-L336 | JET JPS-10-30C |
|---|---|---|
| Motor | Specs; Horsepower: 3 HP; Voltage: 230V; Phase: 1-Phase | Totally enclosed, fan cooled, induction |
| Horsepower | 3 HP | 1.75 HP |
| Current (amps) | — | 14.8 A |
| Voltage | 230V | 120 V |
| Phase | 1-Phase | 1 PH |
| Blade diameter | 10 in. | 10 in. |
| Arbor | 5/8 in. | 5/8 in. (15.88 mm) |
| Rip capacity | Max. Rip To Right Of Blade: 36 in.; Max. Rip To Left Of Blade: 13-1/2 in. | 30 in. |
| Depth of cut | Depth of Cut at 90°: 3-1/8 in.; Depth of Cut at 45°: 2-1/8 in. | 3-1/8 in. (79 mm) |
| Bevel capacity | — | 45° left tilt |
| Table size | 31 in. x 40 in. | 20 x 27 in. (508 x 686 mm) |
| Table height | 35 in. | 34-3/4 in. (883 mm) |
| Speed | 4300 RPM | 4000 RPM |
| Noise level | — | 80 dB at 30 in. (762mm) from blade |
| Dust port | 4 in. and 5 in. | 4 in. (102 mm) |
| Included | — | 10 in. (254 mm), 40 tooth |
| Dimensions | Length: 66-1/2 in.; Width: 37 in.; Height: 35 in. | 60 x 40 x 43 in. (1524 x 1016 x 1090 mm) |
| Weight | 624 lbs. | — |
| Warranty | 5 Year Warranty | — |
The 36-L336 and JPS-10-30C pages cite each of these figures row by row, and the sources below list where they were read. A dash (6 here) means the figure is not on the maker pages we cite.
Where to buy
DELTA Machinery 36-L336
JET JPS-10-30C
See it at JET: JPS-10-30C
JET's own page for the JPS-10-30C. Not a paid link.
Where the 36-L336 and JPS-10-30C figures differ
- Horsepower: 36-L336: 3 HP. JPS-10-30C: 1.75 HP.
- Voltage: 36-L336: 230V. JPS-10-30C: 120 V.
- Table height: 36-L336: 35 in. JPS-10-30C: 34-3/4 in. (883 mm).
- Speed: 36-L336: 4300 RPM. JPS-10-30C: 4000 RPM.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: 36-L336: Specs; Horsepower: 3 HP; Voltage: 230V; Phase: 1-Phase. JPS-10-30C: Totally enclosed, fan cooled, induction.
- Phase: 36-L336: 1-Phase. JPS-10-30C: 1 PH.
- Rip capacity: 36-L336: Max. Rip To Right Of Blade: 36 in.; Max. Rip To Left Of Blade: 13-1/2 in. JPS-10-30C: 30 in.
- Depth of cut: 36-L336: Depth of Cut at 90°: 3-1/8 in.; Depth of Cut at 45°: 2-1/8 in. JPS-10-30C: 3-1/8 in. (79 mm).
- Table size: 36-L336: 31 in. x 40 in. JPS-10-30C: 20 x 27 in. (508 x 686 mm).
- Dust port: 36-L336: 4 in. and 5 in. JPS-10-30C: 4 in. (102 mm).
- Dimensions: 36-L336: Length: 66-1/2 in.; Width: 37 in.; Height: 35 in. JPS-10-30C: 60 x 40 x 43 in. (1524 x 1016 x 1090 mm).
Where the table has one figure and a dash, only DELTA Machinery's cited pages give weight and warranty; only JET's cited pages give current, bevel capacity, noise level and included. Those rows are open questions for the other maker, not ties between the 36-L336 and JPS-10-30C.
The 36-L336 and the JPS-10-30C in full
DELTA Machinery 36-L336
DELTA Machinery · table saw · blade diameter 10 in. · horsepower 3 HP
JET JPS-10-30C
JET · table saw · blade diameter 10 in. · horsepower 1.75 HP · rip capacity 30 in.
Every tool we list from DELTA Machinery and JET.
Sources
- 36-L336 | 3-HP Motor 10 in. UNISAW® with 36 in. BIESEMEYER® Fence System - Delta Machinery — DELTA Machinery
- DELTA Machinery 36-L336 product page — DELTA Machinery
- Bandsaw, 1.75HP, 115V (JPS-10-30C) | JET Tools — JET
- Operating Instructions and Parts Manual ProShop II 10-inch Table Saw Model JPS2-115, JPS2-230 (M-725000, Edition 6 08/2025) — JET (2025)