See it at DELTA Machinery: 28-400
DELTA Machinery's own page for the 28-400. Not a paid link.
28-400 vs 3962T
DELTA Machinery 28-400 vs WEN Products 3962T. Of the 7 figures both makers publish, 2 differ: throat and warranty. 5 are worded too differently to set side by side: resaw capacity, table size, speed and dust port and 1 more. Both are band saws, compared on the 7 figures published for both.
The makers' figures side by side
| Specification | DELTA Machinery 28-400 | WEN Products 3962T |
|---|---|---|
| Motor | Horsepower: 1-HP; Voltage: 120V/240V; Phase: 1-Phase | — |
| Horsepower | 1-HP | — |
| Current (amps) | — | 3.5 amp |
| Voltage | 120V/240V | — |
| Phase | 1-Phase | — |
| Bevel capacity | — | up to 45 degrees |
| Resaw capacity | 6 in. thick | up to six inches deep |
| Throat | 13-5/8 in. wide | 9-3/4 inch |
| Table size | L 15-3/4 in. x W 18-7/8 in. x H 40-3/4 in. | 14-1/8 x 12-1/2 inch |
| Speed | 1,620 and 3,340 RPM | 1520 or 2620 FPM |
| Dust port | 4 in. integral dust port | 3-in-1 dust port (1-3/4, 2-3/4, 4 inches) |
| Included | 4 in. integral dust port, steel stand and a 93-1/2 in. wood-cutting blade | a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI) |
| Dimensions | 27 in. x 19 in. x 65-1/2 in. | — |
| Weight | 164.9 lbs. | — |
| Warranty | 5 Year Warranty | 2-year warranty |
| Safety listing | UL Listed | — |
Every cell is the maker's own wording, cited on the 28-400 and 3962T pages; the sources are listed at the end. A dash (9 here) means the figure is not on the maker pages we cite.
Where to buy
DELTA Machinery 28-400
WEN Products 3962T
See it at WEN Products: 3962T
WEN Products' own page for the 3962T. Not a paid link.
Where the 28-400 and 3962T figures differ
- Throat: 28-400: 13-5/8 in. wide. 3962T: 9-3/4 inch.
- Warranty: 28-400: 5 Year Warranty. 3962T: 2-year warranty.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Resaw capacity: 28-400: 6 in. thick. 3962T: up to six inches deep.
- Table size: 28-400: L 15-3/4 in. x W 18-7/8 in. x H 40-3/4 in. 3962T: 14-1/8 x 12-1/2 inch.
- Speed: 28-400: 1,620 and 3,340 RPM. 3962T: 1520 or 2620 FPM.
- Dust port: 28-400: 4 in. integral dust port. 3962T: 3-in-1 dust port (1-3/4, 2-3/4, 4 inches).
- Included: 28-400: 4 in. integral dust port, steel stand and a 93-1/2 in. wood-cutting blade. 3962T: a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI).
Where the table has one figure and a dash, only DELTA Machinery's cited pages give motor, horsepower, voltage, phase, dimensions, weight and safety listing; only WEN Products' cited pages give current and bevel capacity. Those rows are open questions for the other maker, not ties between the 28-400 and 3962T.
The 28-400 and the 3962T in full
DELTA Machinery 28-400
DELTA Machinery · band saw · throat 13-5/8 in. wide · resaw capacity 6 in. thick · horsepower 1-HP
WEN Products 3962T
WEN Products · band saw · throat 9-3/4 inch · resaw capacity up to six inches deep
Every tool we list from DELTA Machinery and WEN Products.
Sources
- 28-400 | 14 in. 1-HP Steel Frame Bandsaw - Delta Machinery — DELTA Machinery
- DELTA Machinery 28-400 product page — DELTA Machinery
- DELTA Machinery 28-400 owner's manual — DELTA Machinery
- WEN 3962T 3.5-Amp 10-Inch Two-Speed Band Saw with Stand and Worklight — WEN Products — WEN Products