See it at DELTA Machinery: 26-2241
DELTA Machinery's own page for the 26-2241. Not a paid link.
26-2241 vs DWS713
DELTA Machinery 26-2241 vs DEWALT DWS713. Of the 8 figures both makers publish, 2 differ: speed and warranty. 5 are worded too differently to set side by side: motor, arbor, bevel capacity and miter capacity and 1 more. Both are miter saws with the same blade diameter: blade diameter 10 in. on the 26-2241, 10" (254 mm) on the DWS713, in their makers' figures.
The makers' figures side by side
| Specification | DELTA Machinery 26-2241 | DEWALT DWS713 |
|---|---|---|
| Motor | 15 amp, 120V | 2200 Watts (Max In) |
| Current (amps) | — | 15 Amp |
| Voltage | — | 120 Volt |
| Blade diameter | 10 in. | 10" (254 mm) |
| Arbor | 5/8 in. | 10" (254 mm) saw blades with 5/8" (16 mm) arbor holes; speed rating at least 5500 RPM |
| Bevel capacity | 45° left and right | 48° bevel left: 3° right |
| Miter capacity | 50° left miter and 60° right miter | 50° miter left and right |
| Crosscut capacity | 1.5 in. x 15.25 in. (2 x 16 lumber) | Max. Width 6.1" (155 mm) Result Height 1.25" (32 mm) |
| Speed | 4,000 RPM | 5000 RPM |
| Dust port | 1.5 in. | — |
| Included | — | (1) 10-Inch (254mm) Carbide tipped blade, (1) Wrench, (1) Dust bag, (1) Vertical clamp |
| Weight | 55 lbs. (24.95 kg.) | — |
| Cord length | 7 ft | — |
| Warranty | 5 year | 3 Year Limited Warranty |
Each figure is the maker's own, as cited row by row on the 26-2241 and DWS713 pages and listed in the sources below. 6 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
DELTA Machinery 26-2241
DEWALT DWS713
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at DEWALT: DWS713
DEWALT's own page for the DWS713. Not a paid link.
Where the 26-2241 and DWS713 figures differ
- Speed: 26-2241: 4,000 RPM. DWS713: 5000 RPM.
- Warranty: 26-2241: 5 year. DWS713: 3 Year Limited Warranty.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Motor: 26-2241: 15 amp, 120V. DWS713: 2200 Watts (Max In).
- Arbor: 26-2241: 5/8 in. DWS713: 10" (254 mm) saw blades with 5/8" (16 mm) arbor holes; speed rating at least 5500 RPM.
- Bevel capacity: 26-2241: 45° left and right. DWS713: 48° bevel left: 3° right.
- Miter capacity: 26-2241: 50° left miter and 60° right miter. DWS713: 50° miter left and right.
- Crosscut capacity: 26-2241: 1.5 in. x 15.25 in. (2 x 16 lumber). DWS713: Max. Width 6.1" (155 mm) Result Height 1.25" (32 mm).
Figures cited for one of the two: only DELTA Machinery's cited pages give dust port, weight and cord length; only DEWALT's cited pages give current, voltage and included. Ask the other maker before treating the 26-2241 and DWS713 as equal on those points.
The 26-2241 and the DWS713 in full
DELTA Machinery 26-2241
DELTA Machinery · miter saw · blade diameter 10 in. · crosscut capacity 1.5 in. x 15.25 in. (2 x 16 lumber)
DEWALT DWS713
DEWALT · miter saw · blade diameter 10" (254 mm) · current (amps) 15 Amp
Every tool we list from DELTA Machinery and DEWALT.
Sources
- 26-2241 | 10 in. Dual Bevel Sliding Cruzer Miter Saw - Delta Machinery — DELTA Machinery
- DELTA Machinery 26-2241 product page — DELTA Machinery
- 15A 10 in. Single-Bevel Compound Miter Saw — DEWALT
- DWS713 10" (254 mm) Compound Miter Saw Instruction Manual (NA379757) — DEWALT