See it at Bosch: GCM18V-07SN
Bosch's own page for the GCM18V-07SN. Not a paid link.
GCM18V-07SN vs 2733-20
Bosch GCM18V-07SN vs Milwaukee Tool 2733-20. Of the 5 figures both makers publish, none differs outright. 3 are worded too differently to set side by side: voltage, crosscut capacity and included. Both are miter saws with the same blade diameter: blade diameter 7-1/4" on the GCM18V-07SN, 7.25 in on the 2733-20, in their makers' figures.
The makers' figures side by side
| Specification | Bosch GCM18V-07SN | Milwaukee Tool 2733-20 |
|---|---|---|
| Voltage | 18V | 18 DC |
| Blade diameter | 7-1/4" | 7.25 in |
| Arbor | — | 5/8" |
| Bevel capacity | -2° to 47° | — |
| Miter capacity | 48° Left, 48° Right | — |
| Crosscut capacity | 2-1/4" x 8-1/4" | 8.3" |
| Included | (1) GCM18V-07S PROFACTOR 18V 7-1/4 In. Single-Bevel Slide Miter Saw, (1) 7-1/4 In. 24-Tooth Carbide-Tipped Miter Saw Blade, (1) Material Clamp, (1) Dust Bag, (1) Blade Wrench | Blade Wrench; Carbide Tipped Blade; Clamp |
| Weight | 26 lb | 26 lb |
| Warranty | — | 5 Year Limited Warranty |
Each figure is the maker's own, as cited row by row on the GCM18V-07SN and 2733-20 pages and listed in the sources below. 4 cells show a dash: the maker pages we cite do not state that figure.
Where to buy
Bosch GCM18V-07SN
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
Milwaukee Tool 2733-20
See it at Milwaukee Tool: 2733-20
Milwaukee Tool's own page for the 2733-20. Not a paid link.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Voltage: GCM18V-07SN: 18V. 2733-20: 18 DC.
- Crosscut capacity: GCM18V-07SN: 2-1/4" x 8-1/4". 2733-20: 8.3".
- Included: GCM18V-07SN: (1) GCM18V-07S PROFACTOR 18V 7-1/4 In. Single-Bevel Slide Miter Saw, (1) 7-1/4 In. 24-Tooth Carbide-Tipped Miter Saw Blade, (1) Material Clamp, (1) Dust Bag, (1) Blade Wrench. 2733-20: Blade Wrench; Carbide Tipped Blade; Clamp.
Figures cited for one of the two: only Bosch's cited pages give bevel capacity and miter capacity; only Milwaukee Tool's cited pages give arbor and warranty. Ask the other maker before treating the GCM18V-07SN and 2733-20 as equal on those points.
The GCM18V-07SN and the 2733-20 in full
Bosch GCM18V-07SN
Bosch · miter saw · blade diameter 7-1/4" · crosscut capacity 2-1/4" x 8-1/4"
Milwaukee Tool 2733-20
Milwaukee Tool · miter saw · blade diameter 7.25 in · crosscut capacity 8.3"
Every tool we list from Bosch and Milwaukee Tool.
Sources
- GCM18V-07SN PROFACTOR 18V Miter Saws — Bosch
- M18 FUEL™ 7-1/4" Dual Bevel Sliding Compound Miter Saw | Milwaukee Tool — Milwaukee Tool
- 2733-20 Operator's Manual (58-14-0083) — Milwaukee Tool