See it at Bosch: CM10GD
Bosch's own page for the CM10GD. Not a paid link.
CM10GD vs DWS713
Bosch CM10GD vs DEWALT DWS713. Of the 8 figures both makers publish, none differs outright. 4 are worded too differently to set side by side: bevel capacity, miter capacity, crosscut capacity and included. Both are miter saws with the same blade diameter: blade diameter 10" on the CM10GD, 10" (254 mm) on the DWS713, in their makers' figures.
The makers' figures side by side
| Specification | Bosch CM10GD | DEWALT DWS713 |
|---|---|---|
| Motor | — | 2200 Watts (Max In) |
| Current (amps) | 15 | 15 Amp |
| Voltage | 120V | 120 Volt |
| Blade diameter | 10" | 10" (254 mm) |
| Arbor | — | 10" (254 mm) saw blades with 5/8" (16 mm) arbor holes; speed rating at least 5500 RPM |
| Bevel capacity | 47° left and 47° right | 48° bevel left: 3° right |
| Miter capacity | 52° Left, 60° Right | 50° miter left and right |
| Crosscut capacity | 3-1/8" x 12" | Max. Width 6.1" (155 mm) Result Height 1.25" (32 mm) |
| Speed | 5,000 RPM | 5000 RPM |
| Included | Includes; (1) 10 In. 60-Tooth Carbide-Tipped Saw Blade; (1) Wrench; (1) Work Clamp; (1) Dust Bag; (1) Vacuum adapter/elbow | (1) 10-Inch (254mm) Carbide tipped blade, (1) Wrench, (1) Dust bag, (1) Vertical clamp |
| Weight | 64 lb | — |
| Warranty | — | 3 Year Limited Warranty |
Each figure is the maker's own, as cited row by row on the CM10GD and DWS713 pages and listed in the sources below. Where a cell has a dash, 4 of them in this table, the maker pages we cite do not give the figure.
Where to buy
Bosch CM10GD
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
DEWALT DWS713
Paid links · how this works
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
See it at DEWALT: DWS713
DEWALT's own page for the DWS713. Not a paid link.
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Bevel capacity: CM10GD: 47° left and 47° right. DWS713: 48° bevel left: 3° right.
- Miter capacity: CM10GD: 52° Left, 60° Right. DWS713: 50° miter left and right.
- Crosscut capacity: CM10GD: 3-1/8" x 12". DWS713: Max. Width 6.1" (155 mm) Result Height 1.25" (32 mm).
- Included: CM10GD: Includes; (1) 10 In. 60-Tooth Carbide-Tipped Saw Blade; (1) Wrench; (1) Work Clamp; (1) Dust Bag; (1) Vacuum adapter/elbow. DWS713: (1) 10-Inch (254mm) Carbide tipped blade, (1) Wrench, (1) Dust bag, (1) Vertical clamp.
Cited for one of the pair: only Bosch's cited pages give weight; only DEWALT's cited pages give motor, arbor and warranty. The other maker may publish the figure elsewhere; ask it rather than assume the CM10GD and DWS713 match there.
The CM10GD and the DWS713 in full
Bosch CM10GD
Bosch · miter saw · blade diameter 10" · current (amps) 15 · crosscut capacity 3-1/8" x 12"
DEWALT DWS713
DEWALT · miter saw · blade diameter 10" (254 mm) · current (amps) 15 Amp