See it at Bosch: CM10GD
Bosch's own page for the CM10GD. Not a paid link.
CM10GD vs 26-2241
Bosch CM10GD vs DELTA Machinery 26-2241. Of the 6 figures both makers publish, 3 differ: crosscut capacity, speed and weight. 2 are worded too differently to set side by side: bevel capacity and miter capacity. Both are miter saws with the same blade diameter: blade diameter 10" on the CM10GD, 10 in. on the 26-2241, in their makers' figures.
The makers' figures side by side
| Specification | Bosch CM10GD | DELTA Machinery 26-2241 |
|---|---|---|
| Motor | — | 15 amp, 120V |
| Current (amps) | 15 | — |
| Voltage | 120V | — |
| Blade diameter | 10" | 10 in. |
| Arbor | — | 5/8 in. |
| Bevel capacity | 47° left and 47° right | 45° left and right |
| Miter capacity | 52° Left, 60° Right | 50° left miter and 60° right miter |
| Crosscut capacity | 3-1/8" x 12" | 1.5 in. x 15.25 in. (2 x 16 lumber) |
| Speed | 5,000 RPM | 4,000 RPM |
| Dust port | — | 1.5 in. |
| Included | Includes; (1) 10 In. 60-Tooth Carbide-Tipped Saw Blade; (1) Wrench; (1) Work Clamp; (1) Dust Bag; (1) Vacuum adapter/elbow | — |
| Weight | 64 lb | 55 lbs. (24.95 kg.) |
| Cord length | — | 7 ft |
| Warranty | — | 5 year |
The CM10GD and 26-2241 pages cite each of these figures row by row, and the sources below list where they were read. A dash (8 here) means the figure is not on the maker pages we cite.
Where to buy
Bosch CM10GD
As an Amazon Associate we earn from qualifying purchases. Some links on this page are paid: if you buy after following one, the retailer pays Taikra a commission. It costs you nothing extra, and it never changes the specifications we list.
Amazon
Sold via a marketplace listing — the seller may not be the brand or an authorized retailer.
DELTA Machinery 26-2241
See it at DELTA Machinery: 26-2241
DELTA Machinery's own page for the 26-2241. Not a paid link.
Where the CM10GD and 26-2241 figures differ
- Crosscut capacity: CM10GD: 3-1/8" x 12". 26-2241: 1.5 in. x 15.25 in. (2 x 16 lumber).
- Speed: CM10GD: 5,000 RPM. 26-2241: 4,000 RPM.
- Weight: CM10GD: 64 lb. 26-2241: 55 lbs. (24.95 kg.).
Stated differently, not directly comparable
The two makers put these figures in different terms, so the rows cannot be read as a match or a difference from these pages.
- Bevel capacity: CM10GD: 47° left and 47° right. 26-2241: 45° left and right.
- Miter capacity: CM10GD: 52° Left, 60° Right. 26-2241: 50° left miter and 60° right miter.
Where the table has one figure and a dash, only Bosch's cited pages give current, voltage and included; only DELTA Machinery's cited pages give motor, arbor, dust port, cord length and warranty. Those rows are open questions for the other maker, not ties between the CM10GD and 26-2241.
The CM10GD and the 26-2241 in full
Bosch CM10GD
Bosch · miter saw · blade diameter 10" · current (amps) 15 · crosscut capacity 3-1/8" x 12"
DELTA Machinery 26-2241
DELTA Machinery · miter saw · blade diameter 10 in. · crosscut capacity 1.5 in. x 15.25 in. (2 x 16 lumber)
Every tool we list from Bosch and DELTA Machinery.
Sources
- CM10GD Miter Saws — Bosch
- 26-2241 | 10 in. Dual Bevel Sliding Cruzer Miter Saw - Delta Machinery — DELTA Machinery
- DELTA Machinery 26-2241 product page — DELTA Machinery